Travertine and Limestone Countertops in Portland, Oregon: The 2026 Homeowner's Guide
Travertine and Limestone Countertops in Portland, Oregon: The 2026 Homeowner's Guide
Travertine and Limestone Countertops in Portland, Oregon: The 2026 Homeowner's Guide
What Travertine and Limestone Actually Are
What Travertine and Limestone Actually Are
Both stones are calcium carbonate. That single fact explains nearly everything about how they behave.
Limestone forms on ancient sea floors from compressed shell, coral, and marine sediment. It is dense but relatively soft, typically uniform in color, and ranges from pale bone and cream through warm grey, taupe, and honey gold. French limestone and Portuguese Moleanos are the classic examples. Because it formed in quiet water, limestone tends to read calm — subtle mottling, occasional fossil detail, very little dramatic veining. It is the stone you choose when you want the surface to recede and the room to speak.
Travertine forms differently. It precipitates out of mineral hot springs and limestone caves, and as it forms, escaping gas leaves behind the characteristic voids and channels that define the material. Cut across the bed (cross-cut) travertine reads as clouded and organic; cut with the bed (vein-cut) it reads as long linear striations, which is the look most 2026 designers are after. The Roman Colosseum is travertine. So is the Getty Center in Los Angeles. It has an outstanding track record — on walls and floors.
Those voids are the key detail for a countertop conversation. Travertine slabs are sold either filled (the holes packed with color-matched epoxy or cement grout and then polished or honed flat) or unfilled (left open, appropriate for exterior cladding and some feature walls). For any horizontal work surface, you want filled. Even filled, some pinholes will open over time as fill wears, and this is normal behavior for the material rather than a defect.
On the Mohs hardness scale, limestone and travertine sit around 3 to 4. Marble is roughly 3 to 5. Granite is 6 to 7. Quartzite is 7 or higher. That gap is not academic — it is the difference between a surface that shrugs off a dropped cast-iron skillet and one that chips.
Where Travertine and Limestone Belong (and Where They Don't)
Where Travertine and Limestone Belong (and Where They Don't)
We install a lot of this material. We are just deliberate about where it goes.
Excellent applications:
Powder room and guest bath vanities. Low use, low acid exposure, high visual impact. This is the single best use of limestone in a Portland home.
Primary bath vanities — with the caveat that toothpaste, mouthwash, and many facial products are acidic. Honed finish strongly recommended.
Fireplace surrounds and hearths. Travertine is outstanding here. It handles heat, the finish is forgiving, and the material's warmth is exactly what an Alberta Arts bungalow or a Lake Oswego great room wants.
Full-height feature walls and shower surrounds. Vertical surfaces do not get sliced, spilled on, or scrubbed with acid. Vein-cut travertine on a vertical run is one of the best-looking installations we do.
Bar backs, window sills, bench tops, shelving, and hearth caps.
Butler's pantries and coffee stations in households that accept patina.
Applications we steer clients away from:
Primary kitchen counters and islands in a busy household. Citrus, wine, tomato, and coffee live in kitchens. If the homeowner will be unhappy with visible etch marks in year one, this is the wrong stone and we will say so.
Outdoor kitchens anywhere in the Portland metro or the Gorge — freeze-thaw, as covered above.
Homes with young kids and no tolerance for wear. Not a judgment, just a fit question.
Rentals and flips. The maintenance expectation cannot be transferred to a tenant or a future buyer.
There is a real cohort of clients — often folks who have lived with stone in Europe — who want the patina. They see an etched ring as evidence the kitchen is used. If that is genuinely you, a honed limestone island is a wonderful thing to own. Just make that decision knowingly and in writing, not by accident.
How These Stones Perform in the Pacific Northwest
How These Stones Perform in the Pacific Northwest
Portland's climate does specific things to porous natural stone, and it is worth being direct about them.
Interior humidity swings. From October through May, most Portland homes run high indoor humidity, and then the furnace or heat pump dries the air out. Calcium carbonate stone is dimensionally stable through this — it does not warp or move like wood — but a poorly sealed limestone in a bathroom with a marginal exhaust fan will hold moisture in its pore structure longer than it should. In a bath, that means the potential for a slow darkening around a faucet base or the underside of a vessel sink. The fix is not exotic: a properly rated fan, an impregnating sealer, and normal wiping.
Exterior freeze-thaw. This is the one that genuinely matters. Portland and Vancouver WA get a handful of hard freezes each winter, and the Gorge east of town gets many more. Water absorbed into unfilled or under-sealed travertine expands when it freezes and spalls the surface. If you are building an outdoor kitchen in Camas, Happy Valley, or up toward Corbett, travertine countertops are a poor choice regardless of how good they look in the photo. Use granite or a full-body porcelain slab outdoors. We will not install exterior travertine counters, and any fabricator who will should explain their warranty position first.
Our water. Portland's Bull Run water is soft and slightly acidic. On a polished travertine or limestone counter, standing water that is allowed to evaporate repeatedly in the same spot — the ring under a dish rack, the perimeter of a soap dish — will dull the polish over time. Honed and leathered finishes hide this almost entirely, which is a large part of why we steer nearly every Portland limestone client toward a honed finish.
Etching versus staining — two different problems. A stain is a colorant absorbed into the pore structure: red wine, turmeric, olive oil. Sealer prevents most stains. An etch is a chemical burn where acid dissolves the calcium carbonate itself, leaving a dull, slightly rough spot. Lemon juice, vinegar, tomato, wine, coffee, and most bathroom cleaners etch. No sealer on the market prevents etching. Any salesperson who tells you otherwise is either mistaken or selling you something. This is the single most important sentence in this article.
Cost, Finishes, and Fabrication Details in the Portland Metro
Pricing. Installed cost in the Portland and Vancouver WA market generally lands in the following bands, including template, fabrication, standard edge, and installation:
Domestic and common Turkish travertine, filled and honed: roughly $60–$85 per square foot installed.
Standard European limestone: roughly $70–$100 per square foot installed.
Premium French limestone and select vein-cut travertine: roughly $95–$150+ per square foot installed.
These are honest ranges, not teaser numbers. Actual pricing depends on slab availability, square footage, edge profile, number of cutouts, seam count, and whether the job requires a mitered apron or waterfall. Note that these materials often price similarly to mid-grade quartzite — so cost alone is rarely the reason to choose them. You choose them for the look.
Finish selection. This matters more than material selection for day-to-day satisfaction:
Honed — matte, smooth, no reflection. Our default recommendation. Etches are dramatically less visible on a honed surface because there is no gloss to disturb. Roughly 85% of the limestone and travertine we fabricate leaves the shop honed.
Brushed / leathered — light texture, excellent at hiding both etching and water spotting. Superb on a bar or a fireplace hearth. Slightly harder to wipe clean.
Polished — gorgeous on day one, and it will show every etch. We fabricate it when asked, with a clear conversation first.
Tumbled — softened edges and a rustic hand. Better suited to floors and walls than counters.
Fabrication notes specific to soft stone. These slabs need more support than granite: full plywood or steel substrate on overhangs beyond 6″, and reinforcement rodding around sink cutouts and cooktops. Undermount sinks require careful rail buildup. Thin overhangs and delicate ogee edges are risky — we recommend eased, small bevel, or a simple bullnose. Bookmatching vein-cut travertine across a seam is possible and stunning, but it consumes material and must be planned at the slab-selection stage, not at template.
Sealing and maintenance. Expect an impregnating (penetrating) sealer at installation and reapplication every 6 to 12 months in kitchens, every 12 to 24 months in baths. Test it by dripping water on the surface — if it darkens within a few minutes, it is time to reseal. Clean with pH-neutral stone cleaner or plain warm water only. Never use vinegar, lemon, bleach, ammonia, Windex, Comet, Soft Scrub, or generic all-purpose spray. Use cutting boards and coasters. Blot spills rather than wiping them across the surface. Light etching on a honed finish can often be buffed out with a marble polishing powder; deeper damage requires a professional refinish, which is genuinely possible with these stones — unlike quartz, natural stone can be re-honed in place and made new again.
Warm Stone in a Cool, Wet Climate
Walk any Portland design showroom in 2026 and you will notice something: the all-white, high-gloss kitchen has quietly stepped aside. In its place is warmth — oatmeal, bone, cream, sand, and a soft matte hand. A large part of that shift is the return of travertine and limestone, two sedimentary stones that dominated Mediterranean architecture for two thousand years and are now showing up on Pacific Northwest islands, vanities, hearths, and shower benches.
They are beautiful. They are also the most commonly misunderstood materials we sell at Alpine Stones. Travertine and limestone are not granite and they are absolutely not quartz. They are softer, more porous, and more reactive to acid than anything else a homeowner is likely to consider. Used in the right place, with the right finish and the right sealer, they age into something no engineered surface can imitate. Used in the wrong place — say, under a Portland family's morning lemon-water and espresso routine — they will show you exactly what they are within six months.
This guide is the conversation we have with clients in our Northeast Portland showroom before they commit. What these stones actually are, how they behave in our specific climate, what they cost installed in the Portland metro and Vancouver WA, where they belong in a house, where they do not, and what to choose instead when the look is right but the application is wrong.
Warm Stone in a Cool, Wet Climate
Walk any Portland design showroom in 2026 and you will notice something: the all-white, high-gloss kitchen has quietly stepped aside. In its place is warmth — oatmeal, bone, cream, sand, and a soft matte hand. A large part of that shift is the return of travertine and limestone, two sedimentary stones that dominated Mediterranean architecture for two thousand years and are now showing up on Pacific Northwest islands, vanities, hearths, and shower benches.
They are beautiful. They are also the most commonly misunderstood materials we sell at Alpine Stones. Travertine and limestone are not granite and they are absolutely not quartz. They are softer, more porous, and more reactive to acid than anything else a homeowner is likely to consider. Used in the right place, with the right finish and the right sealer, they age into something no engineered surface can imitate. Used in the wrong place — say, under a Portland family's morning lemon-water and espresso routine — they will show you exactly what they are within six months.
This guide is the conversation we have with clients in our Northeast Portland showroom before they commit. What these stones actually are, how they behave in our specific climate, what they cost installed in the Portland metro and Vancouver WA, where they belong in a house, where they do not, and what to choose instead when the look is right but the application is wrong.
Better Alternatives When the Look Is Right but the Stone Isn't
A large share of clients who arrive asking for travertine actually want the aesthetic — warm, matte, sedimentary, quiet. There are several ways to get that with far more durability, and we would rather sell you the right material than the one you named.
Taj Mahal and Perla Venata quartzite. The best answer for most people. Warm cream and soft gold, gentle movement, genuinely quartzite-hard (Mohs 7), acid-resistant, and available honed for a matte hand. From four feet away in a finished kitchen, honed Taj Mahal reads very much like a premium limestone. It is our most-recommended substitution and it holds up to real cooking.
Travertine-look porcelain slabs. Large-format sintered and porcelain slabs from Neolith, Dekton, Laminam, and similar producers now reproduce vein-cut travertine convincingly, including through-body veining on the edge. Completely non-porous, zero sealing, UV-stable, and freeze-thaw safe — which makes porcelain the correct answer for outdoor kitchens in Camas, Happy Valley, or anywhere that freezes. The trade-off is edge fabrication complexity and less depth on close inspection.
Warm-toned quartz. Manufacturers have finally moved past cool grey. Concrete-look and travertine-look quartz in bone, greige, and sand now exist in matte finishes, are fully non-porous, and are appropriate for the busiest family kitchen. Less character than natural stone, far less thought required.
The hybrid approach — our favorite. Put the real travertine or limestone where it will be admired and not abused, and put a workhorse material where the cooking happens. A honed limestone island with quartzite perimeter counters. A travertine fireplace surround and bar back with quartz in the kitchen proper. A limestone powder room vanity that guests notice, and something bulletproof in the primary bath. You get authentic natural stone in the sightlines that matter and no anxiety on the surfaces that work.
See the Slabs Before You Decide
Travertine and limestone are unusually photograph-resistant materials. A screen flattens them — it cannot show you the depth of a vein-cut travertine's striation, the fossil detail in a French limestone, or how a honed surface changes as Portland's overcast light moves across a room. And no photo will tell you how a specific slab will look in your kitchen next to your cabinet color.
Come see them in person. Bring your cabinet door, your floor sample, your paint chip, and a photo of the space. We will walk the slabs with you, be honest about which stones fit how you actually live, show you honed versus polished side by side, and lay out the maintenance reality without softening it. If the answer is that a warm-toned quartzite serves you better than the travertine you came in for, we will tell you that too — we would rather you love the kitchen in year five than buy the slab today.
Alpine Stones
5512 NE 105th Ave, Portland, OR 97220
Phone: (503) 837-1980
CCB# 223660
Serving Portland, Beaverton, Lake Oswego, Tigard, Hillsboro, Gresham, West Linn, Happy Valley, Camas, and Vancouver WA.
Schedule a showroom visit or request a free estimate at alpinestones.com.
Terms & Conditions
CCB#: 223660
COPYRIGHT 2025 ALPINE STONES, INC
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
RESOURCES
STAY CONNECTED
Mon-Fri / 9am-4pm
CCB#: 223660
COPYRIGHT 2025 ALPINE STONES, INC
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Terms & Conditions
CCB#: 223660
COPYRIGHT 2025 ALPINE STONES, INC
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
RESOURCES
STAY CONNECTED
Mon-Fri / 9am-4pm
Terms & Conditions
CCB#: 223660
COPYRIGHT 2025 ALPINE STONES, INC
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
RESOURCES
STAY CONNECTED
Mon-Fri / 9am-4pm
See the Slabs Before You Decide
Travertine and limestone are unusually photograph-resistant materials. A screen flattens them — it cannot show you the depth of a vein-cut travertine's striation, the fossil detail in a French limestone, or how a honed surface changes as Portland's overcast light moves across a room. And no photo will tell you how a specific slab will look in your kitchen next to your cabinet color.
Come see them in person. Bring your cabinet door, your floor sample, your paint chip, and a photo of the space. We will walk the slabs with you, be honest about which stones fit how you actually live, show you honed versus polished side by side, and lay out the maintenance reality without softening it. If the answer is that a warm-toned quartzite serves you better than the travertine you came in for, we will tell you that too — we would rather you love the kitchen in year five than buy the slab today.
Alpine Stones
5512 NE 105th Ave, Portland, OR 97220
Phone: (503) 837-1980
CCB# 223660
Serving Portland, Beaverton, Lake Oswego, Tigard, Hillsboro, Gresham, West Linn, Happy Valley, Camas, and Vancouver WA.
Schedule a showroom visit or request a free estimate at alpinestones.com.
Better Alternatives When the Look Is Right but the Stone Isn't
A large share of clients who arrive asking for travertine actually want the aesthetic — warm, matte, sedimentary, quiet. There are several ways to get that with far more durability, and we would rather sell you the right material than the one you named.
Taj Mahal and Perla Venata quartzite. The best answer for most people. Warm cream and soft gold, gentle movement, genuinely quartzite-hard (Mohs 7), acid-resistant, and available honed for a matte hand. From four feet away in a finished kitchen, honed Taj Mahal reads very much like a premium limestone. It is our most-recommended substitution and it holds up to real cooking.
Travertine-look porcelain slabs. Large-format sintered and porcelain slabs from Neolith, Dekton, Laminam, and similar producers now reproduce vein-cut travertine convincingly, including through-body veining on the edge. Completely non-porous, zero sealing, UV-stable, and freeze-thaw safe — which makes porcelain the correct answer for outdoor kitchens in Camas, Happy Valley, or anywhere that freezes. The trade-off is edge fabrication complexity and less depth on close inspection.
Warm-toned quartz. Manufacturers have finally moved past cool grey. Concrete-look and travertine-look quartz in bone, greige, and sand now exist in matte finishes, are fully non-porous, and are appropriate for the busiest family kitchen. Less character than natural stone, far less thought required.
The hybrid approach — our favorite. Put the real travertine or limestone where it will be admired and not abused, and put a workhorse material where the cooking happens. A honed limestone island with quartzite perimeter counters. A travertine fireplace surround and bar back with quartz in the kitchen proper. A limestone powder room vanity that guests notice, and something bulletproof in the primary bath. You get authentic natural stone in the sightlines that matter and no anxiety on the surfaces that work.
See the Slabs Before You Decide
Travertine and limestone are unusually photograph-resistant materials. A screen flattens them — it cannot show you the depth of a vein-cut travertine's striation, the fossil detail in a French limestone, or how a honed surface changes as Portland's overcast light moves across a room. And no photo will tell you how a specific slab will look in your kitchen next to your cabinet color.
Come see them in person. Bring your cabinet door, your floor sample, your paint chip, and a photo of the space. We will walk the slabs with you, be honest about which stones fit how you actually live, show you honed versus polished side by side, and lay out the maintenance reality without softening it. If the answer is that a warm-toned quartzite serves you better than the travertine you came in for, we will tell you that too — we would rather you love the kitchen in year five than buy the slab today.
Alpine Stones
5512 NE 105th Ave, Portland, OR 97220
Phone: (503) 837-1980
CCB# 223660
Serving Portland, Beaverton, Lake Oswego, Tigard, Hillsboro, Gresham, West Linn, Happy Valley, Camas, and Vancouver WA.
Schedule a showroom visit or request a free estimate at alpinestones.com.
How These Stones Perform in the Pacific Northwest
Portland's climate does specific things to porous natural stone, and it is worth being direct about them.
Interior humidity swings. From October through May, most Portland homes run high indoor humidity, and then the furnace or heat pump dries the air out. Calcium carbonate stone is dimensionally stable through this — it does not warp or move like wood — but a poorly sealed limestone in a bathroom with a marginal exhaust fan will hold moisture in its pore structure longer than it should. In a bath, that means the potential for a slow darkening around a faucet base or the underside of a vessel sink. The fix is not exotic: a properly rated fan, an impregnating sealer, and normal wiping.
Exterior freeze-thaw. This is the one that genuinely matters. Portland and Vancouver WA get a handful of hard freezes each winter, and the Gorge east of town gets many more. Water absorbed into unfilled or under-sealed travertine expands when it freezes and spalls the surface. If you are building an outdoor kitchen in Camas, Happy Valley, or up toward Corbett, travertine countertops are a poor choice regardless of how good they look in the photo. Use granite or a full-body porcelain slab outdoors. We will not install exterior travertine counters, and any fabricator who will should explain their warranty position first.
Our water. Portland's Bull Run water is soft and slightly acidic. On a polished travertine or limestone counter, standing water that is allowed to evaporate repeatedly in the same spot — the ring under a dish rack, the perimeter of a soap dish — will dull the polish over time. Honed and leathered finishes hide this almost entirely, which is a large part of why we steer nearly every Portland limestone client toward a honed finish.
Etching versus staining — two different problems. A stain is a colorant absorbed into the pore structure: red wine, turmeric, olive oil. Sealer prevents most stains. An etch is a chemical burn where acid dissolves the calcium carbonate itself, leaving a dull, slightly rough spot. Lemon juice, vinegar, tomato, wine, coffee, and most bathroom cleaners etch. No sealer on the market prevents etching. Any salesperson who tells you otherwise is either mistaken or selling you something. This is the single most important sentence in this article.
Where Travertine and Limestone Belong (and Where They Don't)
We install a lot of this material. We are just deliberate about where it goes.
Excellent applications:
Powder room and guest bath vanities. Low use, low acid exposure, high visual impact. This is the single best use of limestone in a Portland home.
Primary bath vanities — with the caveat that toothpaste, mouthwash, and many facial products are acidic. Honed finish strongly recommended.
Fireplace surrounds and hearths. Travertine is outstanding here. It handles heat, the finish is forgiving, and the material's warmth is exactly what an Alberta Arts bungalow or a Lake Oswego great room wants.
Full-height feature walls and shower surrounds. Vertical surfaces do not get sliced, spilled on, or scrubbed with acid. Vein-cut travertine on a vertical run is one of the best-looking installations we do.
Bar backs, window sills, bench tops, shelving, and hearth caps.
Butler's pantries and coffee stations in households that accept patina.
Applications we steer clients away from:
Primary kitchen counters and islands in a busy household. Citrus, wine, tomato, and coffee live in kitchens. If the homeowner will be unhappy with visible etch marks in year one, this is the wrong stone and we will say so.
Outdoor kitchens anywhere in the Portland metro or the Gorge — freeze-thaw, as covered above.
Homes with young kids and no tolerance for wear. Not a judgment, just a fit question.
Rentals and flips. The maintenance expectation cannot be transferred to a tenant or a future buyer.
There is a real cohort of clients — often folks who have lived with stone in Europe — who want the patina. They see an etched ring as evidence the kitchen is used. If that is genuinely you, a honed limestone island is a wonderful thing to own. Just make that decision knowingly and in writing, not by accident.
Cost, Finishes, and Fabrication Details in the Portland Metro
Pricing. Installed cost in the Portland and Vancouver WA market generally lands in the following bands, including template, fabrication, standard edge, and installation:
Domestic and common Turkish travertine, filled and honed: roughly $60–$85 per square foot installed.
Standard European limestone: roughly $70–$100 per square foot installed.
Premium French limestone and select vein-cut travertine: roughly $95–$150+ per square foot installed.
These are honest ranges, not teaser numbers. Actual pricing depends on slab availability, square footage, edge profile, number of cutouts, seam count, and whether the job requires a mitered apron or waterfall. Note that these materials often price similarly to mid-grade quartzite — so cost alone is rarely the reason to choose them. You choose them for the look.
Finish selection. This matters more than material selection for day-to-day satisfaction:
Honed — matte, smooth, no reflection. Our default recommendation. Etches are dramatically less visible on a honed surface because there is no gloss to disturb. Roughly 85% of the limestone and travertine we fabricate leaves the shop honed.
Brushed / leathered — light texture, excellent at hiding both etching and water spotting. Superb on a bar or a fireplace hearth. Slightly harder to wipe clean.
Polished — gorgeous on day one, and it will show every etch. We fabricate it when asked, with a clear conversation first.
Tumbled — softened edges and a rustic hand. Better suited to floors and walls than counters.
Fabrication notes specific to soft stone. These slabs need more support than granite: full plywood or steel substrate on overhangs beyond 6″, and reinforcement rodding around sink cutouts and cooktops. Undermount sinks require careful rail buildup. Thin overhangs and delicate ogee edges are risky — we recommend eased, small bevel, or a simple bullnose. Bookmatching vein-cut travertine across a seam is possible and stunning, but it consumes material and must be planned at the slab-selection stage, not at template.
Sealing and maintenance. Expect an impregnating (penetrating) sealer at installation and reapplication every 6 to 12 months in kitchens, every 12 to 24 months in baths. Test it by dripping water on the surface — if it darkens within a few minutes, it is time to reseal. Clean with pH-neutral stone cleaner or plain warm water only. Never use vinegar, lemon, bleach, ammonia, Windex, Comet, Soft Scrub, or generic all-purpose spray. Use cutting boards and coasters. Blot spills rather than wiping them across the surface. Light etching on a honed finish can often be buffed out with a marble polishing powder; deeper damage requires a professional refinish, which is genuinely possible with these stones — unlike quartz, natural stone can be re-honed in place and made new again.
Better Alternatives When the Look Is Right but the Stone Isn't
A large share of clients who arrive asking for travertine actually want the aesthetic — warm, matte, sedimentary, quiet. There are several ways to get that with far more durability, and we would rather sell you the right material than the one you named.
Taj Mahal and Perla Venata quartzite. The best answer for most people. Warm cream and soft gold, gentle movement, genuinely quartzite-hard (Mohs 7), acid-resistant, and available honed for a matte hand. From four feet away in a finished kitchen, honed Taj Mahal reads very much like a premium limestone. It is our most-recommended substitution and it holds up to real cooking.
Travertine-look porcelain slabs. Large-format sintered and porcelain slabs from Neolith, Dekton, Laminam, and similar producers now reproduce vein-cut travertine convincingly, including through-body veining on the edge. Completely non-porous, zero sealing, UV-stable, and freeze-thaw safe — which makes porcelain the correct answer for outdoor kitchens in Camas, Happy Valley, or anywhere that freezes. The trade-off is edge fabrication complexity and less depth on close inspection.
Warm-toned quartz. Manufacturers have finally moved past cool grey. Concrete-look and travertine-look quartz in bone, greige, and sand now exist in matte finishes, are fully non-porous, and are appropriate for the busiest family kitchen. Less character than natural stone, far less thought required.
The hybrid approach — our favorite. Put the real travertine or limestone where it will be admired and not abused, and put a workhorse material where the cooking happens. A honed limestone island with quartzite perimeter counters. A travertine fireplace surround and bar back with quartz in the kitchen proper. A limestone powder room vanity that guests notice, and something bulletproof in the primary bath. You get authentic natural stone in the sightlines that matter and no anxiety on the surfaces that work.